Westinghouse Fridge Seals: Aftermarket Replacement Guide

Westinghouse Fridge & Freezer Door Seal Replacement Guide

A worn, damaged or loose fridge door seal can affect how well a refrigerator or freezer door closes against the cabinet. If your Westinghouse appliance needs a replacement seal, the appliance model number is the best starting point for identifying a compatible product.

Fridge Seal Gasket supplies aftermarket replacement fridge and freezer door seals for a wide range of compatible Westinghouse appliance models.

What Does a Westinghouse Fridge Door Seal Do?

The fridge door seal, also known as a gasket, runs around the perimeter of the refrigerator or freezer door. When the door is closed, the seal should make consistent contact with the appliance cabinet.

If the seal becomes torn, loose, hardened or distorted, warm air may enter the appliance and make it more difficult to maintain a stable internal temperature.

Common Westinghouse Fridge & Freezer Types

Westinghouse has produced a wide range of refrigeration appliances, including:

• Top-mount refrigerators
• Bottom-mount refrigerators
• French-door refrigerators
• Side-by-side refrigerators
• Single-door refrigerators
• Upright freezers
• Chest freezers

Door seal dimensions, profiles and mounting methods can vary between models. Always use the appliance model number when searching for a compatible replacement seal.

The Role of a Fridge Door Seal

• Door Contact: The seal helps the refrigerator or freezer door make consistent contact with the cabinet.
• Temperature Stability: A damaged seal may allow warm air to enter the appliance and can make it more difficult to maintain the set temperature.
• Moisture Control: Warm, humid air entering through a damaged seal can contribute to condensation or frost in some operating conditions.
• Appliance Operation: If warm air enters through the door, the refrigeration system may need to operate for longer or more frequent cooling cycles.

Choosing a Compatible Westinghouse Replacement Seal

When replacing a Westinghouse fridge or freezer door seal, check the appliance model number before ordering.

1. Find the Model Number
   The model number is usually shown on a label inside the refrigerator or freezer. Its exact location varies between appliances.
2. Check Model Compatibility
   Use the model number to locate replacement seals listed as compatible with your appliance.
3. Check the Seal Profile
   Different models may use different gasket profiles, dimensions and magnetic configurations.
4. Check the Mounting Method
   Depending on the appliance, the seal may use a push-in, screw-in or another mounting method.

Important: Our Westinghouse compatible seals are aftermarket replacement products. They are not genuine Westinghouse OEM parts unless a product page specifically states otherwise.

Signs Your Westinghouse Fridge Seal May Need Attention

Check the door seal if you notice:

• Visible cracks, tears or splits in the gasket
• Sections of the seal pulling away from the door
• A hardened or distorted seal
• Uneven contact between the seal and appliance cabinet
• Condensation around the door area
• Frost or ice developing near the freezer door
• The refrigerator appearing to run for longer or more frequent periods

These symptoms can have more than one cause, so check the door seal, door alignment and other appliance components where appropriate.

Westinghouse Fridge Seal Installation Tips

Installation requirements depend on the appliance model and seal type. Check the relevant product information before removing the existing gasket.

1. Confirm the Replacement
   Check the appliance model number and compare the replacement seal with the existing gasket before installation.
2. Remove the Existing Seal
   Remove the old gasket according to its mounting method. Some seals fit into a channel, while others may be held by screws or retainers.
3. Clean the Mounting Area
   Remove dirt and residue from the area where the replacement seal will be installed.
4. Install the Replacement Seal
   Position the replacement evenly around the door and follow the appropriate installation method for the appliance.
5. Check the Door
   After installation, close the door and inspect the seal around the perimeter to check that it is positioned evenly.

Westinghouse Fridge Seal Maintenance

• Clean Regularly: Wipe dirt and food residue from the gasket using a cleaning method suitable for your appliance.
• Inspect for Damage: Check periodically for cracks, splits, loose sections or deformation.
• Keep the Door Area Clear: Make sure containers, shelves or other items do not interfere with the door closing.
• Check Door Alignment: If the door does not close evenly, hinges or alignment may also need to be checked.

Frequently Asked Questions

Q: Are your Westinghouse fridge seals genuine OEM parts?
A: No. Our Westinghouse compatible fridge and freezer seals are aftermarket replacement products and are not genuine Westinghouse OEM parts unless a specific product page states otherwise.

Q: How do I find the correct replacement seal?
A: Find the appliance model number, usually shown on a label inside the refrigerator or freezer, and use that number to search for a compatible replacement seal. If you are unsure, contact our team for assistance.

Q: Can I install a Westinghouse fridge seal myself?
A: Some door seals can be installed without a technician, while others use different mounting systems. Check the seal type and installation requirements for your appliance before starting.

Q: When should a fridge door seal be replaced?
A: There is no fixed replacement interval for every appliance. Check the seal when it becomes damaged, loose, hardened, distorted or no longer makes consistent contact with the cabinet.

Q: Can replacing a damaged seal help the refrigerator operate normally?
A: A damaged door seal may allow warm air to enter the appliance and make it harder to maintain the set temperature. Replacing it with a compatible seal can help restore proper door sealing. Appliance performance and energy use depend on several factors, including appliance condition, settings, ambient temperature and usage.

Find a Compatible Westinghouse Replacement Seal

Fridge Seal Gasket manufactures and supplies aftermarket replacement fridge and freezer door seals for compatible Westinghouse appliance models.

Use your appliance model number to search for a compatible replacement, or contact our team if you need help identifying the correct seal.

We offer A$20 flat-rate express shipping Australia-wide.

Browse our Westinghouse compatible fridge and freezer door seals.